Package jmri.implementation

Class AddressedHighCvProgrammerFacade

java.lang.Object

jmri.jmrix.AbstractProgrammerFacade

jmri.implementation.AddressedHighCvProgrammerFacade

All Implemented Interfaces:

java.util.EventListener, Disposable, ProgListener, Programmer

public class AddressedHighCvProgrammerFacade
extends AbstractProgrammerFacade
implements ProgListener

Programmer facade, at this point just an example.

This is for decoders that have an alternate high-CV access method for command stations that can't address all 1024. It falls back to that mode if the CS can't directly address an requested CV address. In the fall back, CVs from 0 to "top" are addressed directly. (Top being a supplied parameter) Above the top CV, the upper part of the CV address written to a specific CV, followed by an write with just the lower part to a second CV, then access to a 3rd CV for the value read/write. The upper and lower parts are calculated using a supplied modulus, e.g. 100.

This method is used by some ESU decoders.

See Also:

ProgrammerFacadeSelector

Nested Class Summary

Nested Classes

Modifier and Type	Class	Description
(package private) static class	AddressedHighCvProgrammerFacade.ProgState

Nested classes/interfaces inherited from interface jmri.Programmer

Programmer.WriteConfirmMode

Field Summary

Fields

Modifier and Type	Field	Description
(package private) int	_cv
(package private) Programmer	_prog
(package private) int	_startVal
(package private) int	_val
(package private) java.lang.String	addrCVhigh
(package private) java.lang.String	addrCVlow
(package private) int	modulo
(package private) AddressedHighCvProgrammerFacade.ProgState	state
(package private) int	top
(package private) java.lang.String	valueCV

Fields inherited from class jmri.jmrix.AbstractProgrammerFacade

prog

Fields inherited from interface jmri.ProgListener

CommError, ConfirmFailed, FailedTimeout, NoAck, NoLocoDetected, NotImplemented, OK, ProgrammerBusy, ProgrammingShort, SequenceError, UnknownError, UserAborted

Constructor Summary

Constructors

Constructor	Description
AddressedHighCvProgrammerFacade(Programmer prog, java.lang.String top, java.lang.String addrCVhigh, java.lang.String addrCVlow, java.lang.String valueCV, java.lang.String modulo)

Method Summary

Modifier and Type	Method	Description
boolean	getCanRead()	Checks the general read capability, regardless of mode
boolean	getCanRead(java.lang.String addr)	Checks the general read capability, regardless of mode, for a specific address
boolean	getCanWrite()	Checks the general write capability, regardless of mode
boolean	getCanWrite(java.lang.String addr)	Checks the general write capability, regardless of mode, for a specific address
void	programmingOpReply(int value, int status)	Receive a callback at the end of a programming operation.
void	readCV(java.lang.String CV, ProgListener p)	Perform a CV read in the system-specific manner, and using the specified programming mode.
void	readCV(java.lang.String CV, ProgListener p, int startVal)	Perform a CV read in the system-specific manner, and using the specified programming mode, possibly using a hint of the current value to speed up programming.
protected void	useProgrammer(ProgListener p)
void	writeCV(java.lang.String CV, int val, ProgListener p)	Perform a CV write in the system-specific manner, and using the specified programming mode.

Methods inherited from class jmri.jmrix.AbstractProgrammerFacade

addPropertyChangeListener, confirmCV, decodeErrorCode, getMode, getSupportedModes, getWriteConfirmMode, removePropertyChangeListener, setMode

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface jmri.Programmer

dispose, notifyProgListenerEnd

Field Detail

top

int top

addrCVhigh

java.lang.String addrCVhigh

addrCVlow

java.lang.String addrCVlow

valueCV

java.lang.String valueCV

modulo

int modulo

_prog

Programmer _prog

_val

int _val

_cv

int _cv

_startVal

int _startVal

state

AddressedHighCvProgrammerFacade.ProgState state

Constructor Detail

AddressedHighCvProgrammerFacade

public AddressedHighCvProgrammerFacade(Programmer prog,
                                       java.lang.String top,
                                       java.lang.String addrCVhigh,
                                       java.lang.String addrCVlow,
                                       java.lang.String valueCV,
                                       java.lang.String modulo)

Parameters:

prog - the programmer associated with this facade

top - CVs above this use the indirect method

addrCVhigh - CV to which the high part of address is to be written

addrCVlow - CV to which the low part of address is to be written

valueCV - Value read/written here once address has been written

modulo - Modulus for determining high/low address parts

Method Detail

writeCV

public void writeCV(java.lang.String CV,
                    int val,
                    ProgListener p)
             throws ProgrammerException

Description copied from class: AbstractProgrammerFacade

Perform a CV write in the system-specific manner, and using the specified programming mode.

Handles a general address space through a String address. Each programmer defines the acceptable formats.

Note that this returns before the write is complete; you have to provide a ProgListener to hear about completion. For simplicity, expect the return to be on the GUI thread.

Exceptions will only be thrown at the start, not during the actual programming sequence. A typical exception would be due to an invalid mode (though that should be prevented earlier)

Specified by:

writeCV in interface Programmer

Overrides:

writeCV in class AbstractProgrammerFacade

Parameters:

CV - the CV to write

val - the value to write

p - the listener that will be notified of the write

Throws:

ProgrammerException - if unable to communicate

readCV

public void readCV(java.lang.String CV,
                   ProgListener p)
            throws ProgrammerException

Description copied from class: AbstractProgrammerFacade

Perform a CV read in the system-specific manner, and using the specified programming mode.

Handles a general address space through a String address. Each programmer defines the acceptable formats.

Note that this returns before the write is complete; you have to provide a ProgListener to hear about completion. For simplicity, expect the return to be on the GUI thread.

Exceptions will only be thrown at the start, not during the actual programming sequence. A typical exception would be due to an invalid mode (though that should be prevented earlier)

Specified by:

readCV in interface Programmer

Overrides:

readCV in class AbstractProgrammerFacade

Parameters:

CV - the CV to read

p - the listener that will be notified of the read

Throws:

ProgrammerException - if unable to communicate

readCV

public void readCV(java.lang.String CV,
                   ProgListener p,
                   int startVal)
            throws ProgrammerException

Description copied from interface: Programmer

Perform a CV read in the system-specific manner, and using the specified programming mode, possibly using a hint of the current value to speed up programming.

Handles a general address space through a String address. Each programmer defines the acceptable formats.

On systems that support it, the startVal is a hint as to what the current value of the CV might be (e.g. the value from the roster). This could be verified immediately in direct byte mode to speed up the read process.

Note that this returns before the write is complete; you have to provide a ProgListener to hear about completion. For simplicity, expect the return to be on the GUI thread.

Defaults to the normal read method if not overridden in a specific implementation.

Exceptions will only be thrown at the start, not during the actual programming sequence. A typical exception would be due to an invalid mode (though that should be prevented earlier)

Specified by:

readCV in interface Programmer

Parameters:

CV - the CV to read

p - the listener that will be notified of the read

startVal - a hint of what the current value might be, or 0

Throws:

ProgrammerException - if unable to communicate

useProgrammer

protected void useProgrammer(ProgListener p)
                      throws ProgrammerException

Throws:

ProgrammerException

programmingOpReply

public void programmingOpReply(int value,
                               int status)

Description copied from interface: ProgListener

Receive a callback at the end of a programming operation.

Specified by:

programmingOpReply in interface ProgListener

Parameters:

value - Value from a read operation, or value written on a write

status - Denotes the completion code. Note that this is a bitwise combination of the various status coded defined in this interface.

getCanRead

public boolean getCanRead()

Description copied from class: AbstractProgrammerFacade

Checks the general read capability, regardless of mode

Specified by:

getCanRead in interface Programmer

Overrides:

getCanRead in class AbstractProgrammerFacade

Returns:

true if the programmer is capable of reading; false otherwise

getCanRead

public boolean getCanRead(java.lang.String addr)

Description copied from class: AbstractProgrammerFacade

Checks the general read capability, regardless of mode, for a specific address

Specified by:

getCanRead in interface Programmer

Overrides:

getCanRead in class AbstractProgrammerFacade

Parameters:

addr - the address to read

Returns:

true if the address can be read; false otherwise

getCanWrite

public boolean getCanWrite()

Description copied from class: AbstractProgrammerFacade

Checks the general write capability, regardless of mode

Specified by:

getCanWrite in interface Programmer

Overrides:

getCanWrite in class AbstractProgrammerFacade

Returns:

true if the programmer is capable of writing; false otherwise

getCanWrite

public boolean getCanWrite(java.lang.String addr)

Description copied from class: AbstractProgrammerFacade

Checks the general write capability, regardless of mode, for a specific address

Specified by:

getCanWrite in interface Programmer

Overrides:

getCanWrite in class AbstractProgrammerFacade

Parameters:

addr - the address to write to

Returns:

true if the address can be written to; false otherwise