JMRI: Scripts To Go...
Setting the Default State of Turnouts
(Example contributed by Jerry Britton)
My layout, the Pennsylvania Railroad Eastern Region, already features over a hundred turnouts, with many more to come. At this time, and for the foreseeable future, the turnouts do not provide feedback; it's an expense I am not ready to incur.
I've developed PanelPro panels for a pair of dispatchers to use to control the railroad. PanelPro issues turnout commands via LocoNet (Digitrax system). Turnouts are powered by Tortoise switch machines which are controlled by NCE SwitchIt stationary decoders which monitor LocoNet for commands.
The problem is, without detection on the turnouts themselves, every time PanelPro is opened for the first time, all of the turnouts show a "?" state, meaning PanelPro doesn't know their current state.
Until now, I've invested a considerable amount of time to manually click on each and every turnout to set its state -- any state -- then set it to the desired state. I've suggested that a default state field be added to the Turnout Table -- and maybe we'll see that in the future -- but for now my need may be met via a script. Perhaps you'll have a need it can meet as well.
The reason for this web page is that I am a model railroader that uses JMRI. Our very talented programming team is made up of programmers that are also model railroaders. When I asked "How do I...", I received far more information than I needed or desired. I have no interest in becoming a programmer or learning exactly how it "works". I just have a need that I would like to be met with a minimal amount of effort. It was a classic example of asking for the time and being instructed how to build a watch!
So here it is, a down and dirty script that you can copy, make simple edits for your own use, and start using immediately -- without having to know "how" it works.
class setStartup(jmri.jmrit.automat.AbstractAutomaton) : def init(self): return def handle(self): self.waitMsec(10000) # time is in milliseconds turnouts.provideTurnout("1").setState(CLOSED) self.waitMsec(1000) turnouts.provideTurnout("17").setState(CLOSED) self.waitMsec(1000) turnouts.provideTurnout("9").setState(CLOSED) self.waitMsec(1000) return False # all done, don't repeat again setStartup().start() # create one of these, and start it running
Making Use of the Script
You should "copy" and "paste" the sample script into a new text document. Be sure the file is indeed saved as a generic text document, and not something like a Microsoft Word file. The file suffix should be ".py" for Python, the command language used by JMRI.
Save the file where JMRI can access it. I save mine in the same directory as my PanelPro files.
It is VERY IMPORTANT that you keep the formatting of the script the way it is -- with leading tabs. The Python language uses tabs as part of its command structure.
This first part of the script you should include "as is". No changes are necessary:
class setStartup(jmri.jmrit.automat.AbstractAutomaton) : def init(self): return def handle(self): self.waitMsec(10000) # time is in milliseconds
The following part of the script is what you need to modify for your own use. Below are commands to set the state for three turnouts; each consists of two lines.
The first line includes a number in quotations which is the turnout number (decoder ID) that you wish to send the command to. The state in parenthesis at the end of the line (CLOSED or THROWN) is the position you want the turnout set to.
The second line adds a delay between commands, in milliseconds. If you have a lot of turnouts to set, your power supply would likely not be able to handle throwing them all at once. The delay allows the activations to be spread out over time. Dozens of turnouts may be set over a period of a minute or two.
So "paste" multiple instances of the two line commands into your script as desired. You may also add comment lines (beginning with a "#") to document sections of your layout.
turnouts.provideTurnout("1").setState(CLOSED) self.waitMsec(1000) turnouts.provideTurnout("17").setState(CLOSED) self.waitMsec(1000) turnouts.provideTurnout("9").setState(CLOSED) self.waitMsec(1000)
The closing part of the script should also be left "as is":
return False # all done, don't repeat again setStartup().start() # create one of these, and start it running
Implementing the Script
With track power on, you can execute the script by selecting Run Script from the PanelPro menu of JMRI. There will be a delay before script execution begins, but then you will see your turnouts throwing one by one.
You can also select the script to run automatically when PanelPro is launched by selecting the script file in Advanced Preferences. Be sure track power is on before launching PanelPro in this case.
Credit Where Credit Is Due
My unending praise goes to the many developers who provide JMRI to the model railroad community. However, in the case of meeting my need in setting the default state of turnouts, I wish to extend my gratitude to "breezlys" of the JMRI Forum community; he provided the sample script, which I believe he interpreted and modified from JMRI's sample scripts.
-- Page authored by Jerry Britton, March 2006.