The Control Panel Editor
Quick Reference Guide for MouseWhen in edit mode, the following keystroke patterns are available:
- Click(left) - Select and Drag top item
- Shift-Click(left) - Select and Drag item under top item, i.e. 2nd item
- Control-Click(left) - Select and Drag bottom item
- Control-Shift-Click(left) - Show list of all selected items, for superimposed item stacks
- Click(right) - Select and Popup item property changes
- Shift-Click(right) - Select and Popup item property changes for 2nd item
- Control-Click(right) - Select and Popup item property changes for bottom item
- Control-Shift-Click(right) - Select and Popup item property changes of selected item from stack
Control Panel Editor (CPE) is simply an alternative view and controller with exactly the same content data as Panel Editor (PE). You may change the view and control of your Panel whenever and as often as you please. Storage and loading can be done from either editor. The editor used to store the panel will be the editor used at the next load.
Changing the View between EditorsIn either editor, when in edit mode, the last item in the File menu is Change view to "..." ("..." being the other editor). Selecting this item switches the view from one editor mode to the other editor mode.
Differences in the View between EditorsPanel Editor has a separate window for its editing functions. Control Panel Editor does not. In Panel Editor the Edit menu opens an edit window. In Control Panel Editor the Edit menu adds three additional menus to the panel: File, Options, Zoom, AddItems, Circuit Builder and Draw Shapes.
Control Panel Editor MenusWhen in Edit mode, the following menus are displayed.
File MenuThe File menu changes it items between edit mode and operating mode. In edit mode the items are the same as the items in the File menu of the Panel Editor's edit window with a few additional items. They are:
- New Panel
- Store Panels...
- Store Image Index
- Rename Panel
- Create/Edit Image Index
- Change View to Panel Editor
- Delete This Panel...
- Close Editor
In operating mode Control Panel Editor's File menu has only one item: Open Editor.
This menu supports Cut, Copy and Paste with the system clipboard. Cut and Copy will place a copy of a selection item or group into the clipboard. This feature allows copying selections from one panel to different Control Editor panel.
It also has a menu items.
- Select type... - Select all items of a given type, e.g. Sensors, etc
- Select Level... - Select all items of a given display level.
- Select All - Select all items.
Options MenuThe items in this menu are similar to the checkboxes in Panel Editor's edit window with a few additional items and features. As with PE, CPE can globally set repositioning and control attributes. However CPE preserves the individual repositioning and controlling attributes of items and will restore them when global overriding is removed.
- The Override individual Position & Control settings item enables or disables, the next two menu items
- All panel items can be repositioned - globally /lock/unlock all items.
- All panel items control layout
Unchecking the Override individual Position & Control settings item will return the individual item settings to their previous settings. In Panel Editor, checking All panel items can be repositioned and All panel items control layout will permanently set all panel items and restoration cannot be done.
The menu also has items for setting Panel Scrollbars and to Show Tooltips.
Zoom MenuThe Zoom(percentage)... item will enlarge or reduce the panel size.
The Zoom to Fit item will enlarge or reduce the display of all panel items in the panel to fit within the panel window without the use of scroll bars. This can be useful if your panel design happens to be slightly larger that what you can fit on the screen. Rather than using scroll bars to see all items on the panel, "Zoom to Fit" will reduce the display to fit the panel window. Conversely, it will expand the display to fit the panel window. If you resize the panel window, then you should repeat "Zoom to Fit" to resize the display to fit the new panel window dimensions.
AddItems MenuThe Item Palette menu item opens a tabbed window which allows you to add item icons to the panel. Each item type has a tab in the window. Adding items is done by drag and drop. Iconic items may have multiple sets of icons to choose from. Icon sets may be customized and added or deleted to suit the user. Details may be found at The Item Palette. Note that the Item Palette can also be opened with the accelerator key, Control P.
The Palette in Control Panel Editor does not support the Slip/3-Way/Scissor turnout icons that are available from Panel Editor.
The Occupancy Table menu item opens a window where occupancy block (also called track circuits), OBlocks can be defined , along with Portals that join OBlocks and paths OPath that are trackage routes which traverse the OBlock. More information may be found at The Occupancy Block Tables.
The Item Table List menu item opens the device table list. The menu item can also be invoked with the accelerator key, Control T.
WarrantsThe items under this menu are help files for defining Occupancy Blocks and using the them to define Warrants. When two or more Occupancy Blocks are defined additional menu items for defining Warrants will appear. These menu items are described in Warrants. .
Circuit BuilderWhen two or more Occupancy Blocks are defined this menu appears. The items under this menu provide a graphic user interface (GUI) for defining Occupancy Blocks, Portals and Paths, that is, a track circuit. Descriptions of the menu items are found in Circuit Builder.
Draw ShapesThis menu allows drawing of various geometric shapes.
- Draw Rectangle .
- Draw Round Rectangle .
- Draw Polygon .
- Draw Circle .
- Draw Ellipse .
- Disable Selecting Shapes .
When a shape is created or edited a window is displayed to set shape attributes. Colors can be chosen for both the outline and the fill. Also the line thickness of the outline and the transparency of the fill can be set. Precise dimensions can be set with the text fields at the bottom.
Shapes can be controlled with a sensor, by entering a Sensor name in the Visibility/Level Control text field. Activating the sensor may then be used to hide or change the level of the shape when in operating (not editing) mode. This feature can be used to mask and unmask help information to your panel or to highlight items.
Mouse operation in Control Panel EditorControl Panel Editor does not implement the rollover highlighting found in Panel Editor.
SelectionIn Control Panel Editor selection is done with a simple click. Items are deselected with Control click
When items are stacked, Shift-click will select the second-most item in the layer. Control-click will select the bottom-most item in the stack. If the items are stacked over a background item, Control-click will select the bottom-most item above the background. Control-click over only the background will select the background icon.
Multiple SelectionAs with Panel Editor, a selection group can be made using the "selection fence" - a dotted red rectangle that will select all the items completely within the fence. If the Shift key is held down while creating a selection fence, then all items that intersect the dotted red rectangle are selected. This can be a useful feature when items are located at the top and left borders of the panel.
Add or delete items from a selection group by holding the Control key down when selecting the item.
Dragging selectionsDrag selection or selection group with the mouse button held down on any item in the group.
A background icon (i.e. an icon at level 1) can be moved by dragging it with the control key held down.
Duplicating Selections Within Control Panel EditorCopying an item or selection group is done by bringing up the popup for one of the selected items. When the Duplicate popup menu item is clicked, a Copy of the selection group is made on top of the original selections. Drag this copy to wherever you wish to place the copy. The original selection is now deselected and remains at its original postion. The copy procedure can be repeated on the newly positioned copy to continue to make more copies.
Item Popups in Control Panel EditorRight click (meta-click on Mac or Linux) brings up the popup menu for the item.
Hold the Control key down to open the popup menu for a background item.