<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="../XSLT/decoder.xsl"?>
<!DOCTYPE decoder-config SYSTEM "../DTD/decoder-config.dtd">

<!-- Copyright (C) JMRI 2006, 2007 All rights reserved -->
<!-- $Id: MRC_soundbrilliance1636.xml,v 1.3 2009/10/04 01:31:05 jacobsen Exp $ -->
<!--                                                                        -->
<!-- JMRI is free software; you can redistribute it and/or modify it under  -->
<!-- the terms of version 2 of the GNU General Public License as published  -->
<!-- by the Free Software Foundation. See the "COPYING" file for a copy     -->
<!-- of this license.                                                       -->
<!--                                                                        -->
<!-- JMRI is distributed in the hope that it will be useful, but WITHOUT    -->
<!-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or  -->
<!-- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License  -->
<!-- for more details.                                                      -->

<decoder-config>
		<version author="Peter Ulvestad"
			version="3" lastUpdated="20091003" />
		<version author="Bob Jacobsen"
			version="2" lastUpdated="20071223" />
		<version author="Paul Bender"
			version="1" lastUpdated="20060723" />
<!-- made from the MRC_1631 file by Rick Beaber -->
<!-- version 2 fixed a problem in CV 115/116 -->
<!-- version 3 added many tooltips -->


<decoder>
	<family name="Brilliance Sound Decoders" mfg="MRC"
			lowVersionID="32" highVersionID="32">
		<model model="Synch Diesel Sound 1636" numOuts="2" numFns="12"
		            maxTotalCurrent="0.75A" extFnsMRC="yes">
                <!-- note only F0 to F12 are NMRA compatible -->
                <size length="70" width="9.2" height="5.8" units="mm" />
                </model>
 	</family>

	<programming direct="yes" paged="yes" register="yes" ops="yes">
	</programming>

	<variables>

		<variable label="Short Address" CV="1" tooltip="CV1 sets the Short, Primary or 2-digit address [range 1-127]"
						item="Short Address"  default="3">
			<shortAddressVal/>
		</variable>

		<variable label="Start Voltage" CV="2" tooltip="CV2 sets the motor voltage at Speed Step 1 [range 0-32]"
						item="Vstart" default="0">
			<decVal max="32"/>
		</variable>

		<variable label="Acceleration" CV="3" tooltip="CV3 sets the acceleration rate (delay) [range 0-32]"
						item="Accel" default="0">
			<decVal max="32"/>
		</variable>

		<variable label="Deceleration" CV="4" tooltip="CV4 sets the deceleration rate (delay) [range 0-32]"
						item="Decel" default="0">
			<decVal max="32"/>
		</variable>

		<variable label="Top Voltage" CV="5" tooltip="CV5 sets the motor voltage at the top Speed Step [range 0-32]"
						item="Vhigh" default="32">
			<decVal max="32"/>
		</variable>

		<variable label="Version ID" CV="7" readOnly="yes" tooltip="CV7 is the Decoder ID, Read Only"
						item="Decoder Version">
			<decVal/>
		</variable>

		<variable label="Manufacturer ID" CV="8" readOnly="yes" tooltip="CV8 is the Manufacturer ID, MRC=143, Read Only"
						item="Manufacturer" default="143">
			<decVal/>
		</variable>

		<variable label="Long Address" CV="17" tooltip="CVs 17 and 18 set the Extended (4 digit) address, range 128-9999"
						item="Extended Address">
			<longAddressVal/>
		</variable>

		<variable label="Advanced Consist address" CV="19" tooltip="CV19 set the Advanced Consist address, range 0-127"
						item="Consist Address" mask="XVVVVVVV" default="0">
			<decVal max="127"/>
		</variable>

		<variable label="Locomotive Direction In Consist" CV="19"
						item="Consist Direction" mask="VXXXXXXX" default="0">
			<enumVal>
				<enumChoice choice="Normal"/>
				<enumChoice choice="Reversed"/>
			</enumVal>
		</variable>

		<variable label="Consist Function" CV="21" tooltip="CV21 selects the address accessory functions will respond to"
						item="Functions Respond To" mask="XXXXXXXV" default="0">
			<enumVal>
				<enumChoice choice="Functions respond to Locomotive Address Only"/>
				<enumChoice choice="Functions respond to Consist Address Only"/>
			</enumVal>
		</variable>

		<variable label="Normal direction of motion" CV="29" tooltip="CV29 '1' bit sets the direction of motion"
						item="Locomotive Direction" mask="XXXXXXXV">
			<enumVal>
				<enumChoice choice="Forward"/>
				<enumChoice choice="Reverse"/>
			</enumVal>
		</variable>

		<variable label="Speed Steps" CV="29" tooltip="CV29 ['2' bit] sets the Speed Step resolution"
						item="Speed Step Mode" mask="XXXXXXVX" default="1">
			<enumVal>
				<enumChoice choice="14"/>
				<enumChoice choice="28/128 (recommended)"/>
			</enumVal>
		</variable>

		<variable label="Analog Conversion Mode" CV="29" tooltip="CV29 ['4' bit] determines if loco motor will respond to DCC only (OFF) or DC and DCC (ON)"
						item="Analog (DC) Operation" mask="XXXXXVXX" default="0">
			<enumVal>
				<enumChoice choice="Off"/>
				<enumChoice choice="On"/>
			</enumVal>
		</variable>

		<variable label="Use Speed Table" CV="29" tooltip="CV29 ['8' bit] determines if loco will use Speed Table or not"
						item="Speed Table Definition" mask="XXXVXXXX" default="1">
			<enumVal>
				<enumChoice choice="Don't use Speed Table"/>
				<enumChoice choice="Use Speed Table"/>
			</enumVal>
		</variable>

		<variable label="Sound On/Off" CV="49" tooltip="CV49 turns sound on or off"
						item="Sound Option 1" mask="XXXXXXXV" default="1" >
			<enumVal>
				<enumChoice choice="Off"/>
				<enumChoice choice="On"/>
                        </enumVal>
		</variable>

		<variable label="Horn Type" CV="50" item="Sound Option 2" default="4"
				comment="Range 0-15">
			<decVal max="15"/>
		</variable>

		<variable label="Horn Volume" CV="51" item="Sound Setting 1" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Bell Type" CV="52" item="Sound Option 3" default="3"
				comment="Range 0-9">
			<decVal max="9"/>
		</variable>

		<variable label="Bell Volume" CV="53" item="Sound Setting 2" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Bell Ring Rate" CV="54" item="Sound Setting 3" default="3"
				comment="Range 0-50">
			<decVal max="50"/>
		</variable>

		<variable label="Diesel Rumble Volume" CV="55" item="Sound Setting 4" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Brake Squeal Volume" CV="56" item="Sound Setting 5" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Dynamic Brake Volume" item="Sound Setting 6" CV="57" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Air Release Volume" item="Sound Setting 7" CV="58" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Air Pump Volume" CV="59" item="Sound Setting 8" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Safety Pop Value Volume" CV="60" item="Sound Setting 11" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Engine Cooling Fan Volume" CV="61" item="Sound Setting 12" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Coupling Volume" CV="62" item="Sound Setting 13" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Random Noise Volume" CV="63" item="Sound Setting 14" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Rail wheel clack" CV="64" item="Sound Setting 15" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="User ID #1" CV="105" item="User Id #1" default="0"
				comment="Range 0-255">
			<decVal max="255"/>
		</variable>

		<variable label="User ID #2" CV="106" item="User Id #2" default="0"
				comment="Range 0-255">
			<decVal max="255"/>
		</variable>

		<variable label="Auto Brake squeal" item="Sound Option 4" CV="117" default="1">
			<enumVal>
				<enumChoice choice="Off"/>
				<enumChoice choice="On"/>
			</enumVal>
		</variable>

		<variable label="Coupling Sound Type" item="Sound Option 5" CV="116" default="1">
		     <enumVal>
		     		<enumChoice choice="Type 1"/>
				<enumChoice choice="Type 2"/>
				<enumChoice choice="Off"/>
		     </enumVal>
		</variable>

		<variable label="Lights Enable/Disable" item="Global lighting option 4" CV="117" default="1">
  			<enumVal>
				<enumChoice choice="Disable" value="0"/>
				<enumChoice choice="Enable" value="1"/>
			</enumVal>
		</variable>

		<variable label="Coupling Fire Volume" CV="119" item="Sound Setting 16" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Brake Release Volume" CV="120" item="Sound Setting 17" default="3"
				comment="Range 0-3">
			<decVal max="3"/>
		</variable>

		<variable label="Random Noise" item="Sound Option 6" CV="121" default="1">
			<enumVal>
		     		<enumChoice choice="Disable" value="0"/>
				<enumChoice choice="Enable" value="1"/>
			</enumVal>
			</variable>

		<variable label="Diesel Sound Type" item="Sound Option 7" CV="122" default="1">
			<enumVal>
				<enumChoice choice="Off"/>
				<enumChoice choice="RPM and notch synchro to speed"/>
				<enumChoice choice="linear RPM synchro to speed"/>
				<enumChoice choice="notch up/down with F8/F9"/>
			</enumVal>
		</variable>

		<variable label="Select Speed Curve" item="Speed Table Selection" CV="124" default="0">
			<enumVal>
				<enumChoice choice="Linear"/>
				<enumChoice choice="Slow increase at slow speed"/>
				<enumChoice choice="Fast increase at slow speed"/>
			</enumVal>
		</variable>

	</variables>

	<resets>
		<factReset label="Reset All CVs" CV="125" default="1"/>
	</resets>

</decoder>

<pane name="MRC">

        <column>
            <label label="MRC NOTE: Some DCC systems do not have enough power on the program track for programming"/>
            <label label="sound decoders. If your system is one of these, There are Program Track Boosters availlable"/>
            <label label="from aftermarket DCC suppliers."/>
        </column>

</pane>

</decoder-config>




 	  	 
