JMRI: PanelPro, An Application For Making Control Panels

The JMRI libraries contain the PanelPro application for creating simple control panels. This page describes that application, and how to use it.

PanelPro provides two separate ways to create control panels.

The Panel Editor lets you draw a panel exactly the way you want it, and then animate parts of it to show the status of your layout and let you click to control it.
The Layout Editor provides tools for drawing your layout while constructing the logic for signals, etc. It constrains how the panel appears a little, but it can save significant time when first bringing your layout up.

Many people use both, with the Layout Editor creating schematic panels to handle the actual configuration for signals and Panel Editor providing exactly the appearance desired.

Rodney Black's CATS application is another tool for creating modern-style control panels.

Please see our gallery page for example of how model railroaders have used this on their own layouts. There's also an example of using PanelPro for modular layouts.

The Panel Editor

Using the JMRI Panel Editor, you can make a control panel look and operate any way you want.

A panel is one or more background pictures, on which are drawn icons to represent turnouts, sensors and signals on the layout. You can build the background from small icons (left above), or provide a detailed drawing that you created in a drawing program (right above).

You can use these tools to configure quite complicated panels for large layouts. The example above is from Nick Kulp's Cornwall Railroad. There's a page on the main web site that describes this in detail. For another example, see Jerry Britton's page describing how he's controlling his layout. There's also a page describing the panel for Kent Williams's Oregon Washington Navigation & Railway . Robert Bucklew's Quaker Valley Lines is also building a CTC panel using PanelPro. (This is a second generation panel with some advanced features; there's also a page describing the older, simpler panel)_

Also, refer to the signaling page for information on adding logic to operate the signals on your layout under the control of your panel.

Panel operation

Clicking on a turnout symbol flips it from closed to thrown and vice-versa. A turnout also has "unknown" and "inconsistent" states, represented by an icon with a question mark and X respectively. These represent a state where no information has been received, and where the information is internally inconsistent (e.g. both closed and thrown at the same time).

This control can be used in various ways. For example, you could have a turnout icon covering a turnout on a schematic diagram. When you click on it, the turnout on the layout would be commanded to change, and the track diagram would show which way a train would be routed. Or you could use icons that show a lever to the right or left, and create a panel that looks like a traditional US&S panel.

"Sensors" can be used to represent occupancy indicators or other inputs. The default icon is a small circle, with color used to represent the state of the sensor. These respond to changes on the layout automatically. Clicking on a sensor causes the sensor to alternate between "active" and "inactive" states. With the default icons, active is a green circle and inactive is an empty circle. These are meant to represent a lit/dark panel indicator. A red circle represents the "unknown" state, used when no information has yet been received from the layout.

Creating a panel

These are made with a "Panel Editor", which allows you to place images to represent turnouts, sensors (on some systems) and trackwork.

The rest of this page gives you a walk-through of the process. If you'd like to see animated clinics that show how each of these things are actually done on the computer screen, please see Dick Bronson's clinics page.

You start the editor by selecting "New panel..." from the "Panel" menu in the PanelPro program. You'll get a blank control panel, plus the editor window:
Screen shot of panel editor

From the top, this contains:

Two text fields specifying where (in pixels) new components will be inserted on the panel. You can generally ignore these, as once the components has been inserted you can drag it around by holding the meta (Apple, command, etc) key down.
A button to pick a background image. The editor's drawing capability is rudimentary and likely to stay that way for a long time. To create CTC panels, complex track diagrams, etc, its easier to draw them in some other program and insert them as the background image for a JMRI control panel.
A button to add a text label. Put the desired text in the field and click the button. You can slide the label around after inserting it, but you currently can't edit the text later.
A button to add an icon as a label. This is a way to add track symbols, etc. To select the icon, click the "edit icon..." button to pop an icon editor panel.

The current icon is shown at the top. To change it, use the tree in the bottom of the window to select a new one, then click on the icon at the top of the icon editor panel to load the selected icon. This is a general mechanism: Any icon on an icon editor window can be replaced by selecting the desired new one and clicking on the icon to be replaced.
Two sections for adding left- and right-bound turnouts. These actually work the same way, only with different icons to represent the states of the turnouts. Enter the turnout number (e.g. 23) and click "Add turnout:". If you'd prefer a different graphic for the closed and thrown states, you can change their icons as described above.
A section for adding a sensor. Type the sensor number (e.g. 74) in the field and click "Add sensor:".

After getting the panel the way you want, you can use the "Store panel..." entry in the "Panels" menu to write it to an XML file.

Available Icons

The JMRI library contains lots of contributed icons for representing CTC panels, LEDs, etc. You can browse through them with the tree in the bottom of the editor frame. Perhaps the best way to see what each looks like is to select it in the tree, then click on the icon next to the "Add icon" button. That will load it.

You can also create your own icons and use them by selecting from the "file" section.

For little bits of track, e.g. to connect turnouts, you might want

 resources -> icons -> small schematics ->tracksegments

then block.gif, etc.

We do need to do a better job of organizing the available icons!

Manipulating Icons

To move an icon around on the panel, you "meta-drag" it. On a Mac, that's "hold the cmd key and drag with the cursor"; on windows, it might be the Windows or control key. Or it might be a right-drag. Sorry, I don't have a Windows machine here to figure it out.

There's also a pop-up menu (ctrl-click on a Mac) that will provide various ways to manipulate the icon. It will let you rotate the icon so that it points in whatever direction you want. Text labels can have their font, size and color changed. You can also remove icons from the panel with the popup menu.

Other types of panels

Because this is icon-based, you can create panels that look any way you want. For example, instead of using track-schematic icons for turnouts, you could use small images of the levels and plates on CTC machine. This would give you "mechanical" levers you can flip back and forth with a click. This can be made absolutely prototypical, or can be simplified for easier and faster operation, as you prefer.

It's also possible to create a panel where the "track" lines change color to indicate whether the track is occupied. The procedure for doing that is described on a separate page.

Using the Layout Editor

The Layout Editor helps you create simple schematic panels, while simultaneously setting up the block and signal logic needed to operate the layout. Its strength is its ability to capture how the tracks are connected, where each block is located and how each signal is related to blocks. On the other hand, it provides only limited ability to customize how the panel appears.

You edit via "Edit Mode", which makes the connections between elements and the layout visible (See figure to the right). For example, you can click on the circle in the middle of a track segment and select the associated occupancy detector (Sensor) on the layout. Once you've done that, the color of the track segment on the screen will change when the track is occupied. You can configure the colors used, the width of the track lines, and other details of the presentation.

For more information, please see the Layout Editor help page.

Communicating with Multiple Systems

PanelPro can communicate with more than one layout control system. For example, the Cornwall Railroad mentioned above uses C/MRI hardware for sensing the status of blocks and turnouts on the layout, but drives turnout positions through a Digitrax DCC system.

To configure the program to talk to multiple systems, just select the first one in standard part of the the preferences panel, and the select the second in the "Advanced Preferences". For more information, see the preferences panel help page.

If you add a turnout, sensor or signal to a panel using just a number, e.g. "23", it will be assigned to the first system on the preference panel. To access the 2nd system, you have to use JMRI system names. For example, if the second attachment is to a LocoNet system, you'd refer to a LocoNet Turnout as LT13; a LocoNet sensor as LS21, etc. See the page on names for more information.